Shipping to the U.S. and Canada Trade pricing for approved contractors

Built tough Designed to flex

Become a dealer Get a quote

Products

Resources

Locations

Get a quote (941) 415-0273 info@resin-rubber.com Contractor login Become a dealer

EPDM rubber color visualizer

Pick granule colors, set the shares and see the blend on a 3D sample slab. The tool works out the pounds of each color in a 55 lb batch and saves it all as a one-page spec sheet. Screens shift color, so order a physical sample before you commit.

Loading the visualizer…

How to plan a blend

  1. Tap up to 8 colors in the palette, or start from Poolside, Charcoal, Desert or Playground and change it from there.
  2. Drag a slider or type an exact percentage. The total has to reach 100% before you can save, and Balance to 100% closes a small gap for you.
  3. Turn the slab and look at it from a low angle as well as from above. Small shares of a bright color still show up clearly, so try accents at 10 to 15% first.
  4. Save the spec sheet. It lists each color's share, the pounds for one 55 lb batch and the color codes.
  5. Request a sample of the blend and look at it on site, in daylight, next to the paving, planting and building.

What the numbers mean

Shares are by weight. A 55 lb batch of 34% Light Grey, 33% Light Blue and 33% White is 18.7 lb, 18.2 lb and 18.1 lb. The visualizer rounds to the nearest tenth of a pound and adjusts the last tenth so the column always adds up to 55.0 lb.

One of the twelve published blends may already be close to what you want. They are on the color options page, with recipes in the color blends PDF.

See every color Color blends PDF

Visualizer questions

How accurate are the colors on screen?

Close, but not exact. Every screen shows color a little differently, and daylight on site changes how granules look. Use the visualizer to narrow a blend down, then check a physical sample before you order.

How many colors can go in one blend?

Up to 8. Most installed blends use two to four. The twelve published blends on the color options page all sit in that range.

How are the pound weights worked out?

Each share is a percentage by weight of one 55 lb batch, the same size as a bag of Resin Rubber granules. Weights are rounded to the nearest tenth of a pound and always add up to 55.0 lb. Multiply them by the number of batches on the job.

Can I share a blend with my installer or client?

Yes. Press Save spec sheet once the blend adds up to 100% and send them the PDF. It lists each color, its share, the pounds for one bag and the color code, so they can mix or order exactly what you chose.

Can I order a custom blend?

Custom ratios are possible on larger commercial and municipal jobs. Contact the team about lead times and minimum quantities. On smaller jobs, installers mix solid-color bags on site to the shares on your spec sheet.