Resin rubber flooring FAQs

Resin rubber flooring is a surfacing system made by mixing rubber granules with a resin binder and troweling the mix over a prepared base. The binder holds the granules together as one continuous surface. Resin Rubber supplies the EPDM granules and binders for pool decks, patios, walkways and gyms.

A binder made to bond rubber granules, usually a polyurethane. Choose the binder specified for the granules, the application and the exposure; products are not interchangeable by name alone. Browse the resin binders and ask the materials team for current guidance.

Rubber is the soft, flexible material, here in the form of EPDM granules. Resin is the liquid binder that hardens as it cures. The resin binds the rubber granules into a strong, continuous surface.

EPDM holds its color and elasticity well in sun and weather, which is why it is the usual choice for outdoor surfaces. TPV is often cheaper but tends to fade and stiffen faster, and black SBR crumb is mostly used as a base layer. Read the EPDM vs TPV comparison.

Resin Rubber granules use recycled rubber, so the system gives a hard-wearing finish with a lower-waste material story. Colored EPDM granules are a synthetic rubber, which is a different material from the black SBR crumb made from recycled tires and used mostly as a base layer. Ask the materials team about recycled content for the products on your job.

Use UV-stable aliphatic binder for any layer that stays in the sun, because it does not yellow. Aromatic binder costs less and suits base layers and covered work. Many projects use both. See the binder guide.

Pool decks, patios, pathways, playgrounds, gyms, driveways, decks and other activity spaces. Suitability depends on the base, the intended use and the specified system. Review the installation planning guide and have an installer assess the site before choosing materials.

Often, when the concrete is structurally sound. Cracks, movement, drainage and surface contamination need to be assessed first. An overlay is not a substitute for repairing an unsuitable base.

The cured surface is porous, so water can pass through it rather than sitting on top. How well the area drains still depends on the base underneath and the falls around it, so plan drainage with your installer before the surface goes down.

It depends on the use. Walkways, patios and pool decks are laid thinner than playground safety zones, which go down thicker under equipment to give the cushioning needed for the fall height. Your installer sets the thickness in the specification.

Most residential projects are completed within 1 to 2 days, depending on the size of the area and the condition of the base. Curing time is separate and depends on the materials and the weather. Ask your installer for both the work schedule and the return-to-use instructions.

Binders have a minimum application temperature, and curing slows a lot in cold, damp conditions. If you are planning outside the warmer months, check temperature requirements with the materials team and your installer before scheduling the pour.

No. Resin Rubber supplies the materials and works with a network of approved installers. Request an installer with your location and project details and the team will check availability.

Homeowners should use an approved installer. Contractors can buy materials directly and should look at installer training and the data sheets for the system they plan to install. Training alone does not make a system right for a particular site.

Yes. Solid colors, mixed blends and layouts can be chosen for each project, including borders, zones and logos. Compare the color options, request physical samples and agree the final design with your installer.

Yes. Browse the solid and mixed colors and request a physical sample before you decide. Screen colors can differ from the material, so confirm the sample and blend with your installer. You can also try blends in the rubber visualizer.

Solid colors are one shade per bag and give a flat, even finish. Mixed blends combine two to four colors to a published recipe for a speckled, stone-like look. Both are the same EPDM material and install the same way.

Often, yes. The 28 solid colors cover most team and brand palettes, and larger commercial or municipal jobs can ask about a custom blend ratio. Check the match against physical samples before the order is placed.

Lighter colors generally stay cooler underfoot in direct sun than dark ones, which matters around pools and play areas. Frost, Concrete, Sarasota and Sea Glass are common light choices. Compare samples on site in afternoon sun.

EPDM granules are made to resist UV, and pairing them with a UV-stable aliphatic binder keeps the surface from yellowing. Some change over years in strong sun is normal for any outdoor material, so order the full quantity at once for the closest match on repairs or extensions.

Resin rubber is naturally slip-resistant when wet and soft underfoot, which is why it is widely used around pools, splash pads and wading areas. Slip resistance still depends on the specified system, the surface condition and maintenance, and no surface removes the chance of slipping. Discuss wet-area suitability, drainage and cleaning with your installer.

Any outdoor surface warms up in direct sun, and darker colors get warmer than light ones. For barefoot areas like pool decks and play areas, choose a lighter color and compare samples on site in the afternoon.

It is used in dog parks, kennels and animal care facilities because it is cushioned and can be washed down. Tell your installer how the area is cleaned and disinfected so the specification and finish suit the routine.

Routine care is sweeping off loose dirt and occasional washing with mild soap and water, as directed for the installed system, with no constant resealing cycle to budget for. Follow the product and installer care instructions, keep drainage clear and report damage or loose areas to your installer. See the warranty policy for coverage terms.

Yes. Installers can cut out and replace a section or patch a spot, and using the same blend helps the repair blend in. Spot repair, section replacement and color matching are covered in the Silver installer course.

Service life depends on the materials, the base, the installation, how the area is used, weather exposure and maintenance. Ask your installer what to expect for your project rather than relying on a general lifespan figure.

Read the safety policy and request the safety data sheets for the specific products you plan to use. They cover handling, storage and protective equipment.

For materials, contact Resin Rubber with your application, area, existing surface and preferred colors. For installation, request an approved installer and include your location. The installer assesses the site and provides an installation quote.

Area, the condition of the existing surface, preparation, system thickness, the color or blend and installation requirements. Material quantities alone are not an installed price.

Coverage depends on the installed thickness and the specification, so there is no single figure. Approved trade customers can use the material calculator for an estimate, then have the materials team confirm the number of bags and binder pails for your job.

Yes. Request a physical sample of any color or blend and look at it on site in daylight next to the paving, planting and building before confirming the order.

Resin Rubber supplies projects in the United States and Canada. Dispatch and delivery terms are in the shipping policy, and the team confirms timing for your location when you order.

Yes. Installers and contractors placing repeat orders can open a trade account for volume pricing across the range. Log in to the dealer portal, or look at the dealer program for territory, leads and launch support.